One of the most annoying things that can happen in life is when you are sat watching the television or waiting for the latest episode of Doctor Who to start. All that gathering of snacks and preparing of tea was all for nothing because now you’ve got to get back up again and start trying to figure out what on earth has gone wrong with the thing. If it’s an outside job, then it might be a good idea to not try and meddle with things you don’t understand and give a TV Aerial Installation Swansea area team a ring on or visit their website at www.onevisionltd.co.uk/tv-aerial-installation-swansea/ especially as aerials are tricky things to deal with. There are some steps to take yourself that might help though. These are.
If the screen is black, green or blue it means that there is no signal coming through. The first thing to do is to check that all of the wires to the various boxes that you have are all completely attached and placed in the correct connections. It might seem daft, but this can sometimes be the simple cause of many of the problems. Its very easy to knock one of the connections out if your adjusting the set or doing a little a dusting.
Of the screen isn’t clear or its starting to get those little squares so that the image is not crystal clear, or pixilation to give it it’s correct name, then this could be as a result of a weak signal or even no signal. Again, it’s a good idea to check the connections again or even restart the set and the Wi-Fi box as there may be a bit of a jam with the incoming information for the TV to interpret. Yes, I suppose I am advocating turning it off and on again but sometimes this is the simplest answer and can work. If that’s not enough and the TV settings are all over the place it might be that some wandering hands have got hold of the remote. There is an option on the tv to reset the whole lot back to its factory settings, which is the ultimate turning it off and on again, so that you can pretty much start from scratch. This is resetting is also the case if your TV is not obeying the remotes requests. With some modern TV’s its not even possible to change the channel of setting without using the remote to do it. I miss the old days with the buttons included.